Usually not an emergency

Samsung Washer: Making Loud Noise

Often worn tub bearings, a failing drive pulley, or a chronically unbalanced load. Add a photo of your Samsung Washer in the box below: the Triage Profile says what it is, how urgent it is, and who to call.

Show us the washer.

Snap a photo — see what it is, how urgent, who to call. One photo of the problem. fixRAgent reads it and gives you a Triage Profile.

Phone photo of a front-load washer with water spreading across the floor in front of it
TODAY3 of 3 reads agreed
Washing machine
Call an appliance technician
A real Triage Profile from this photo, read by fixRAgent on 9 Oct 2026. Open it ›

Or start with a sentence

In the next five minutes

Safe first steps, before the call. Nothing here needs a tool.

  1. Note what the noise sounds like and when it happens, then stop the washer and switch off its breaker, or unplug it if the plug is dry and you can reach it without moving the washer.

  2. Take a photo of the washer and any code on the display, without opening anything.

  3. If you can read its label without moving it, note the brand and model number for the call.

Everything else about this problem

Is it an emergency?

Is a loud noise from a Samsung washer an emergency?

Usually not an emergency. A grinding, rattling or humming that has just started most often comes from a fan, motor, belt or loose panel. Stop using it and cut the power if the noise comes with a burning smell, smoke or sparks.

Symptoms & causes

Samsung washers making loud noises often indicate internal mechanical issues. A grinding or roaring sound during the spin cycle typically points to worn drum bearings, while thumping or banging suggests failing suspension rods or shock absorbers. A rattling noise might be a foreign object trapped in the drum or pump, requiring immediate investigation to prevent further damage.

Tools & parts

To address loud noises, you'll likely need a basic socket set, screwdrivers, and potentially a spanner wrench for the tub nut. Specific parts like new Samsung drum bearings or a set of suspension rods might be required. A bearing puller could also be necessary for removing stubborn old bearings.

Safety first

Always begin by unplugging your Samsung washer from the electrical outlet to prevent electrocution. Turn off both hot and cold water supply valves behind the machine to avoid water leaks or flooding. Be mindful of sharp edges inside the washer and heavy components that could cause injury during disassembly.

When to call a pro

If the noise persists after checking basic components, or if you suspect a motor issue, it's best to call a professional technician. Complex failures like a faulty main control board or a damaged stator assembly often require specialized testing tools and expertise. Furthermore, if your Samsung washer has a "sealed tub" design, replacing drum bearings is an extremely complex and often cost-prohibitive repair best left to a service professional.

Questions people ask

What if my Samsung washer is making a grinding noise?

A grinding noise during the spin cycle is a strong indicator of worn-out drum bearings. These bearings support the inner tub and fail over time, requiring replacement to restore quiet operation.

What if I hear a loud thumping or banging sound?

Thumping or banging often points to failing suspension rods or shock absorbers that are no longer effectively dampening the tub's movement. Check for uneven loads first, but if the noise persists, these components likely need replacement.

Why is my Samsung washer making a high-pitched squealing noise?

A high-pitched squeal, especially during agitation or spin, could be a worn drive belt or a failing motor bearing. Inspect the belt for cracks or fraying, and consider if the motor itself is struggling.

Related problems
fixRAgent

What it is, how urgent, who to call

Add a photo of your Samsung Washer in the box at the top. The Triage Profile says what it is, how urgent it is, and who to call.

Get started