Amana Washer: Leaking Water
Most often a worn door boot or gasket, a loose hose clamp, or a failing drain-pump seal. Add a photo of your Amana Washer in the box below: the Triage Profile says what it is, how urgent it is, and who to call.
Show us the washer.
Snap a photo — see what it is, how urgent, who to call. One photo of the problem. fixRAgent reads it and gives you a Triage Profile.
Or start with a sentence
AR Logic LLC · Privacy · Managing this for someone else? There is a version of this for whole portfolios. Managers: set it up for your buildings →
In the next five minutes
Safe first steps, before the call. Nothing here needs a tool.
If water is near the plug or outlet, don’t touch them. Switch off the washer’s breaker first. Don’t stand in water to reach the breaker panel; if the panel is wet or you’d have to stand in water, leave it and call.
Then turn off the washer’s hot and cold water valves, if you can reach them without moving it.
Take a photo of the washer, the water and any code on the display, without opening anything.
Everything else about this problem
Is it an emergency?
Is an Amana washer leaking water an emergency?
Usually urgent, not an emergency. Turn off the water to it and unplug it or switch off its breaker, then soak up standing water. If water is reaching outlets or cords, switch off the breaker before touching anything; water coming through a ceiling is an emergency.
Symptoms & causes
Common symptoms of an Amana washer leaking water include puddles forming around the base of the machine, especially during fill or spin cycles, or visible drips from underneath the appliance. These leaks often stem from issues with the drain system, water inlet valves, or dispenser assembly. For Amana models, pay close attention to leaks originating from the front lower panel, which often indicates a clogged drain pump filter or a loose hose connection.
Tools & parts
Essential tools for checking an Amana washer leak include a screwdriver set (Phillips and flathead), pliers, and a bucket or towels for water containment. Specific parts that may need replacement are a new drain hose, a water inlet valve, or a drain pump assembly. A shop vac can also be extremely useful for quickly removing any standing water from the floor or the washer's base.
Safety first
Always unplug your Amana washer from the electrical outlet before attempting any inspection or repair to prevent the risk of electric shock. Immediately shut off both the hot and cold water supply valves connected to the washer to stop further water flow and prevent potential flooding. Be mindful of sharp edges inside the appliance and consider wearing protective gloves to safeguard your hands during the repair process.
When to call a pro
A professional technician should be called if the leak is determined to be from a cracked outer tub, as this repair is highly complex, labor-intensive, and often requires specialized tools. If the main tub bearing seal has failed, causing water to leak from the center bottom of the washer, this also typically necessitates professional expertise due to the extensive disassembly required. Persistent leaks after checking all common components, or if the control board is suspected of faulty operation leading to valve issues, are also strong indicators to contact a qualified appliance repair specialist.
Questions people ask
Why is my Amana washer leaking only during the spin cycle?
Leaks occurring specifically during the spin cycle often point to a problem with the drain hose or the drain pump. The increased water pressure and vibrations during this phase can exacerbate a small crack or a loose connection in these components, making the leak more apparent.
Can a clogged dispenser cause an Amana washer to leak?
Yes, a clogged detergent or fabric softener dispenser can indeed cause water to overflow from the dispenser drawer and leak down the front or side of your Amana washer. Regularly cleaning the dispenser with hot water and a brush can prevent this common issue.
What should I do if the leak seems to be coming from the bottom of the washer?
If the leak is from the bottom, first check the drain pump filter for clogs and ensure all drain hose connections are secure. A faulty water inlet valve or a cracked drain pump housing are also common culprits for bottom leaks, requiring closer inspection of these components.
Related problems
More Amana washer problems
Check another symptom for your Amana Washer.
Leaking water: other brands
Guides and hubs
A resident sent you this?
Water under an appliance: how a property manager sorts it into emergency, urgent or routine, and what moves it up.
The manager’s guide →Ask AI about this problem
What it is, how urgent, who to call
Add a photo of your Amana Washer in the box at the top. The Triage Profile says what it is, how urgent it is, and who to call.