Trane furnace: error code 5 Flashes
What it means, in Trane’s own words, how urgent it is, and who to call.
Show us the furnace.
Snap a photo — see what it is, how urgent, who to call. One photo of the problem. fixRAgent reads it and gives you a Triage Profile.
Is 5 Flashes on a Trane furnace an emergency? Treat it as urgent — deal with it today. If you smell gas, do not touch switches or try to relight anything: leave, and call the gas utility or 911 from outside.
Or start with a sentence
Property manager? Set this up for all your buildings →
AR Logic LLC · Privacy
Everything about 5 Flashes
What 5 Flashes means
“Flame sensed when no flame should be present”
— Trane, Trane Installer's Guide 18-CD29D1-14-EN, Integrated Furnace Control error flash codes. Codes vary by model: check your furnace’s own manual.
Where 5 Flashes fits
In plain words, 5 Flashes is about ignition — the burner did not light, or the control saw a flame signal it did not expect.
Trane gives 4 other ignition and flame codes for this furnace: 2 Flashes (System Lockout (Retries or Recycles exceeded)), 7 Flashes (Gas valve circuit error), 8 Flashes (Low flame sense signal), Continuous ON (Replace IFC).
Next to 5 Flashes in Trane’s table: 4 Flashes (Open High Limit Device) and 6 Flashes (115 Volt AC power reversed or Poor Grounding).
What to try first
- Turn the furnace off and call an HVAC technician. If you smell gas, leave and call the gas utility from outside.
Safety first
If you smell gas, do not touch switches or try to relight anything: leave, and call the gas utility or 911 from outside.
How urgent is it?
At least TODAY. fixRAgent treats this code as needing attention today. It points at water where it should not be, overheating, a combustion or ignition safety shutdown, food that may be warming, or a wiring problem. This is fixRAgent’s reading, not the manufacturer’s. A photo can raise it — water near wiring, scorch marks, a gas smell — but a code never lowers what the photo shows.
Who to call
HVAC technician. Have the model and serial numbers from the label ready — a photo of the label works.
Questions people ask
What does 5 Flashes mean on a Trane furnace?
Trane’s own support material (Trane Installer's Guide 18-CD29D1-14-EN, Integrated Furnace Control error flash codes) says: “Flame sensed when no flame should be present”
Is 5 Flashes on a Trane furnace an emergency?
Treat it as urgent — deal with it today. If you smell gas, do not touch switches or try to relight anything: leave, and call the gas utility or 911 from outside.
Who do I call for 5 Flashes?
Usually: HVAC technician. Turn the furnace off and call an HVAC technician. If you smell gas, leave and call the gas utility from outside.
Recalls and manuals
Check whether your model is under a safety recall on the U.S. Consumer Product Safety Commission’s site: cpsc.gov/Recalls. Your owner’s manual is on Trane’s support site; search it with the model number from the label.
Related codes

Not sure it is the code?
Snap a photo of the display and the model label. The Triage Profile says what it is, how urgent it is, and who to call.