At least TODAY

Trane furnace: error code 4 Flashes

What it means, in Trane’s own words, how urgent it is, and who to call.

Show us the furnace.

Snap a photo — see what it is, how urgent, who to call. One photo of the problem. fixRAgent reads it and gives you a Triage Profile.

Is 4 Flashes on a Trane furnace an emergency? Treat it as urgent — deal with it today. If you smell gas, do not touch switches or try to relight anything: leave, and call the gas utility or 911 from outside.

Photo of a gas furnace with its front panels off, burners and control board showing
EMERGENCY3 of 3 reads agreed
Gas furnace
Call an HVAC technician
A real Triage Profile from this photo, read by fixRAgent on 9 Oct 2026. Open it ›

Or start with a sentence

Property manager? Set this up for all your buildings →

Everything about 4 Flashes

What 4 Flashes means

“Open High Limit Device”

— Trane, Trane Installer's Guide 18-CD29D1-14-EN, Integrated Furnace Control error flash codes. Codes vary by model: check your furnace’s own manual.

Where 4 Flashes fits

In plain words, 4 Flashes is about the heating circuit — an element, a relay or a safety limit in the heating path.

Next to 4 Flashes in Trane’s table: 3 Flashes (Draft Pressure Error) and 5 Flashes (Flame sensed when no flame should be present).

What to try first
  • Replace or clean the air filter and open all supply and return vents; if it continues, call an HVAC technician.
Safety first

If you smell gas, do not touch switches or try to relight anything: leave, and call the gas utility or 911 from outside.

How urgent is it?

At least TODAY. fixRAgent treats this code as needing attention today. It points at water where it should not be, overheating, a combustion or ignition safety shutdown, food that may be warming, or a wiring problem. This is fixRAgent’s reading, not the manufacturer’s. A photo can raise it — water near wiring, scorch marks, a gas smell — but a code never lowers what the photo shows.

Who to call

HVAC technician. Have the model and serial numbers from the label ready — a photo of the label works.

Questions people ask

What does 4 Flashes mean on a Trane furnace?

Trane’s own support material (Trane Installer's Guide 18-CD29D1-14-EN, Integrated Furnace Control error flash codes) says: “Open High Limit Device”

Is 4 Flashes on a Trane furnace an emergency?

Treat it as urgent — deal with it today. If you smell gas, do not touch switches or try to relight anything: leave, and call the gas utility or 911 from outside.

Who do I call for 4 Flashes?

Usually: HVAC technician. Replace or clean the air filter and open all supply and return vents; if it continues, call an HVAC technician.

Recalls and manuals

Check whether your model is under a safety recall on the U.S. Consumer Product Safety Commission’s site: cpsc.gov/Recalls. Your owner’s manual is on Trane’s support site; search it with the model number from the label.

Related codes
fixRAgent

Not sure it is the code?

Snap a photo of the display and the model label. The Triage Profile says what it is, how urgent it is, and who to call.

Get started