Snap a photo — see what it is, how urgent, who to call.
One photo of the problem. fixRAgent reads it and gives you a Triage Profile.
Triage a photo nowNo sign-up.
Usually not an emergency. If you smell gas, do not touch switches or try to relight anything: leave, and call the gas utility or 911 from outside.
Take the photo. We’ll tell you what it is.
No sign-up · AR Logic LLC · Privacy
Managing this for someone else? Managers: set it up for your buildings →
Managing this for someone else? There is a version of this for whole portfolios.
Managers: set it up for your buildings →“PRESSURE SWITCH DID NOT OPEN”
— Carrier (shareddocs.com, Carrier's literature host), Carrier 58MCB gas furnace Service and Maintenance Instructions (status codes). Codes vary by model: check your furnace’s own manual.
In plain words, 23 is about venting — the draft or pressure switch did not prove that combustion gases are being pushed out.
Carrier gives one other venting and pressure code for this furnace: 31 (PRESSURE SWITCH DID NOT CLOSE OR REOPENED).
Next to 23 in Carrier’s table: 22 (ABNORMAL FLAME-PROVING SIGNAL) and 24 (SECONDARY VOLTAGE FUSE IS OPEN).
Safety: If you smell gas, do not touch switches or try to relight anything: leave, and call the gas utility or 911 from outside.
At least THIS WEEK. fixRAgent treats this code as a this-week repair: the appliance has reported a fault, but the code alone does not point at a safety hazard. This is fixRAgent’s reading, not the manufacturer’s. A photo can raise it — water near wiring, scorch marks, a gas smell — but a code never lowers what the photo shows.
HVAC technician. Have the model and serial numbers from the label ready — a photo of the label works.
Check whether your model is under a safety recall on the U.S. Consumer Product Safety Commission’s site: cpsc.gov/Recalls. Your owner’s manual is on Carrier’s support site; search it with the model number from the label.