Bosch dishwasher: error code E18
What it means, in Bosch’s own words, how urgent it is, and who to call.
Show us the dishwasher.
Snap a photo — see what it is, how urgent, who to call. One photo of the problem. fixRAgent reads it and gives you a Triage Profile.
Is E18 on a Bosch dishwasher an emergency? Usually not an emergency. If it smells like burning, sparks, or trips the breaker, switch it off at the breaker and leave it off until it is checked.
Or start with a sentence
Property manager? Set this up for all your buildings →
AR Logic LLC · Privacy
Everything about E18
What E18 means
“The water level is too low, or water is not being pumped correctly.”
— Bosch Home Appliances US, Dishwasher Error Codes | Support | Bosch. Codes vary by model: check your dishwasher’s own manual.
The same code can also show as: E3200.
Where E18 fits
In plain words, E18 is about the water supply or level — too little water arrived, or the level sensor reads wrong.
Bosch gives 2 other water supply codes for this dishwasher: E14 (There is a flow meter failure or an issue with water flowing into the dishwasher or the filling system), E16 (There is an issue with water flowing into the dishwasher or the filling system).
Next to E18 in Bosch’s table: E16 (There is an issue with water flowing into the dishwasher or the filling system) and E19 (There is a detergent dispenser solenoid circuit fault/error).
What to try first
- Check the water supply valve is fully open and the inlet hose is not kinked.
Safety first
If it smells like burning, sparks, or trips the breaker, switch it off at the breaker and leave it off until it is checked.
How urgent is it?
At least THIS WEEK. fixRAgent treats this code as a this-week repair: the appliance has reported a fault, but the code alone does not point at a safety hazard. This is fixRAgent’s reading, not the manufacturer’s. A photo can raise it — water near wiring, scorch marks, a gas smell — but a code never lowers what the photo shows.
Who to call
Appliance repair. Have the model and serial numbers from the label ready — a photo of the label works.
Questions people ask
What does E18 mean on a Bosch dishwasher?
Bosch’s own support material (Dishwasher Error Codes | Support | Bosch) says: “The water level is too low, or water is not being pumped correctly.”
Is E18 on a Bosch dishwasher an emergency?
Usually not an emergency. If it smells like burning, sparks, or trips the breaker, switch it off at the breaker and leave it off until it is checked.
Who do I call for E18?
Usually: Appliance repair. Check the water supply valve is fully open and the inlet hose is not kinked.
Recalls and manuals
Check whether your model is under a safety recall on the U.S. Consumer Product Safety Commission’s site: cpsc.gov/Recalls. Your owner’s manual is on Bosch’s support site; search it with the model number from the label.
Related codes

Not sure it is the code?
Snap a photo of the display and the model label. The Triage Profile says what it is, how urgent it is, and who to call.